TELE-FORK
| Tipping load depends on skidsteer model & specifications. Tele-fork available as dedicated skidsteer version or as combination skidsteer / 3 point tractor mount. Dedicated skidsteer version gets center of lift closer to skidsteer. With combination skidsteer / 3 point version simply remove skidsteer plate and hook tractor's rear 3pt links in minutes. Standard forks measure 42" X 1½"X 4" class II standard taper with 16" rail spacing. |
| Tele-fork comes totally assembled except hydraulic couplers & hoses for connecting to skidsteer or tractor. Combination skidsteer / 3 point tractor mount version does not include cylinder for top 3 point link or hoses and couplers - inquire at dealer. Hoses & flat faced coupler kit is available from manufacturer for the dedicated skidsteer version. Tele-Fork weighs 1100 pounds. |
 |
||
 |
 |
 |
| TELE-FORK | ||
| DESCRIPTION | PART NUMBER | WEIGHT |
| TELE-FORK dedicated Skidsteer version | 604-0-0500 | 1100# |
| TELE-FORK combination Skidsteer / 3pt tractor mount version | 604-0-0005 | 1100# |
| TELE-FORK OPTIONS | ||
| DESCRIPTION | PART NUMBER | WEIGHT |
| 48" X 1½" X 4" forks | 604-1-0101 | 214# |
| 60" X 1¾" X 4" forks | 604-1-0102 | 318# |
| ** Optional Hose & Coupler Kits available for Dedicated Skidsteer version only ** |
| DESCRIPTION | PART NUMBER | WEIGHT |
| (2) ½" X 30" Hoses with flat face couplers | TELE-KIT 30F | 10# |
| (2) ½" X 40" Hoses with flat face couplers | TELE-KIT 40F | 10# |
|
Combination Skidsteer / 3-pt Unit: simply remove the skidsteer attachment plate and hook to tractor's rear 3-pt. link in minutes (
fits category II, III, III narrow). Unit does not include cylinder for top 3-pt link, or hoses and couplers (inquire at dealer). Dedicated Skidsteer version gets center of lift 6" closer to skidsteer, and lifts to approximate shelf height of 15' (depending on skidsteer) combine with the lift of your skidsteer. Optional Hoses and Couplers available (see above chart). Rated Lift capacity depends on skidsteer model and specifications. Both units are equipped with standard 42" X 1½" X 4" forks, class II standard taper, w/ 16" rail spacing, rated at 4,500lbs on 24" load center. Standard Equipment: 2½" X 70" stroke hydraulic cylinder provides 70" of lifting height for the unit alone. Both units measure 90" when retracted. |